Brand
Keygeek's distinguishing choice is its bottom housings, which are nylon loaded with fibreglass and graded by how much: N3 is 30 percent, N4 is 40, N5 is 50. More fibreglass means a stiffer shell and a higher-pitched bottom-out, so the grade is a rough sound prediction in a way most housing descriptions are not. Its switches are generally light, generally factory lubed, and usually pair one of those filled-nylon bottoms with a polycarbonate top.
| Type | Manufacturer |
|---|---|
| Country | China |
| Indexed here | 5 entries |
| Force range | 32 to 48 gf |
Official site: keygeek.cn
Every one of the 5 entries has specifications confirmed by more than one independent retailer. Any figure the sources disagreed on was left blank rather than averaged.
Keygeek
A light 40 gf linear bottoming out at 45 gf, factory lubed, 2.0 mm and 3.5 mm. The bottom housing is nylon loaded with 30 percent fibreglass, which Keygeek uses to stiffen the shell and raise the pitch of the bottom-out. A polycarbonate top over a filled-nylon bottom is the pairing most of the Keygeek line uses.
View →
Keygeek
A 37 gf linear bottoming out at 42 gf, factory lubed, with a nylon stem rather than the usual POM. The bottom housing carries 50 percent fibreglass, the highest fill in this batch. Total travel is left out: one shop says 3.8 mm and the other 3.4 mm, and a 0.4 mm disagreement is too large to average.
View →
Keygeek
The heaviest Keygeek linear indexed here: 48 gf to actuate, 53 gf at the bottom, factory lubed, 3.6 mm of travel. The stem is a UPE blend rather than POM, and hollowed at the tip, both choices aimed at the sound rather than the weight. PA12 housing top and bottom.
View →
Keygeek
A 42 gf linear bottoming out at 50 gf, 2.0 mm to actuation and 3.6 mm total. Sits between Cheese V2 at 40 gf and Y2 at 48 gf in the Keygeek range, with a 40 percent fibreglass bottom housing between their 30 and the Full Nylon's 50. Neither vendor states whether it ships lubed.
View →
Keygeek
At 32 gf this is the lightest switch in the index, light enough that resting your hands on the board can press a key. Factory lubed, 2.0 mm to actuation, 3.8 mm total, with a spherical stem tip. Bottom-out force is blank because both shops print 32 gf for it as well, and a spring cannot weigh the same at the top of its travel as at the floor.
View →Keygeek and its logo are the property of their owner and are used here only to identify the brand. Thockery is not affiliated with, endorsed by or partnered with Keygeek. If you own this material and want it removed, email us and it will come down. Details last checked 2026-09-14.